Ab IPBox 9000HD Spécifications télécharger pdf (Page 24)

For manual configuration of the network please set the item “Use DHCP” - „no“

Set up appropriate values for parameters IP Address, Netmask, Use a Gateway and Gateway.

Netmask value must be the same as it is in your computer; IP Address must differ from IP

Address of your PC in last three digits. Example: IP address of your PC is 192.168.0.24, IP

address of your receiver is 192.168.0.25.

You can find out IP address of you PC by ipconfig /all command.

(In your PC: Programs – Accessories – Command Line – write down: ipconfig /all and press

enter. Network configuration of your PC should be displayed).

Inserted IP Address must be unique – no other device connected to your network can use the

same IP address.

Press OK to finish the setup.

Window asking the question if you want to activate the network will be displayed. Select

“yes” and press OK.

Two information windows about activation of the network will be displayed.

Last window shows whether the activation is successful.

You can also configure your network later on through the menu.

Press OK to finish installation wizard.

List of channels appears on the screen. If no setting has been installed the list is empty.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Pas de commentaire

Ab IPBox 9000HD Spécifications Page 24